Test sequence to view all Wizard panels
Use this page for instructions on displaying all of the Wizard panels and
all variations of labeling on the panels.
back to Language localization
instructions
Start The Panorama Factory application. The first Wizard panel
should appear. If you have already started The Panorama Factory or if
you have selected Next time use the Classic interface you may need to
use the New project wizard command (File menu).
NOTE: In V4, the Wizard "tips" (text displayed with the
light-bulb icons) are shown only when the panel is floating (not docked).
If the Wizard panel is docked to the left, right, top or bottom of the
screen, you must press the light-bulb button to see the "tips". These
instructions assume that you are running with the Wizard panel docked.
The Wizard panels have three layouts--floating, horizontal (docked at top
or bottom) and vertical (docked at left or right). You should view
each Wizard panel in all three configurations to be sure your strings look
right.
Procedure 1 -- Test fully automatic stitching.
-
1/7 (or 1/9) - Import
your images. Press the light bulb button to see the tips. Import two images and
then click the Next> button.
-
2/7 (or 2/9) - Choose
stitching method. Press the light bulb button to see the
tips. Select Fully automatic and then click the Next> button.
-
3/7 - Describe your
camera. To see all
variations of this panel, select each Camera type from the drop down list.
Press the light bulb button after each change to see the tips that are
specific to the camera type. The controls on the panel will also change as you change the camera type.
Select Digital camera and then choose *** My camera is not in
the list *** from the Make or Model drop down list to
see a message box about what to do if your camera is not in The Panorama
Factory's camera library.
Choose Digital camera, and select Automatically detect focal
length, Correct barrel distortion and Correct Brightness
falloff.
Click the Next> button.
-
Step 4/7 - Control image quality.
Press the light bulb button to see the tips. Select all check
boxes and click the Next> button.
-
Step 5/7 - Select panorama type.
Press the light bulb button to see the tips. Select each Output
format from the dropdown list. Choose Image file only.
Click the Next> button.
-
Step 6/7 - Create your panorama.
Press the light bulb button to see the tips. Choose Prepare
image for printing and then choose Prepare image for internet
display. The resolution and size controls will change as you
change the option.
Click the Next> button and observe the Wizard progress panel.
Progress messages (the section starting with string 200) are shown in the
title line.
-
Step 7/7 - Save and print your panorama.
Press the light bulb button to see the tips. Click the
Next> button.
-
Learn more about....
Press the light bulb button to see the tips. Click the Done button.
Procedure 2 -- Test semi-automatic and manual photo stitching.
-
1/9 (or 1/7) - Import
your images. You have already tested this Wizard panel in
Procedure 1. Import two images and
then click the Next> button.
-
2/9 (or 2/7) - Choose
stitching method. Select Semi-automatic and then
click the Next> button.
-
3/9 - Describe your
camera. You have already tested this Wizard panel in
Procedure 1.
Choose Digital camera, and select Automatically detect focal
length, Correct barrel distortion and Correct Brightness
falloff.
Click the Next> button.
-
Step 4/9 - Control
image quality. You have already tested this
Wizard panel in Procedure 1. Select all check
boxes and click the Next> button.
-
Step 5/9 - Select
panorama type. You have already tested this
Wizard panel in Procedure 1. Choose Image file only.
Click the Next> button.
-
Step 6/9 - Place
stitching points (semi-automatic stitching). Press the light
bulb button to see the tips for semi-automatic stitching. Place 5
stitching points in corresponding positions on the pair of images.
Click the Next> button.
-
Step 7/9 - Preview at
low resolution (semi-automatic stitching). Press the light
bulb button to see the tips for semi-automatic stitching.
Click the Back> button.
-
Step 6/9 - Place
stitching points (manual stitching). De-select the checkbox
labeled Rotate all images the same amount. Press the light bulb
button to see the tips for manual stitching. Click the Next> button.
-
Step 7/9 - Preview at
low resolution (manual stitching). Press the light bulb
button to see the tips for manual stitching.
-
You do not need to test Step
8/9 and Step 9/9. These are the same as Step 6/7 and Step 7/7 for
fully automatic stitching.
Procedure 3 -- Test manual document stitching.
-
1/7 (or 1/9) - Import
your images. You have already tested this Wizard panel in
Procedure 1. Import two images and
then click the Next> button.
-
2/7 (or 2/9) - Choose
stitching method. Select Manul under Document
stitching and then click the Next> button.
(The "describe your camera"
step does not apply to document stitching.)
-
Step 3/7 - Control
image quality. You have already tested this
Wizard panel in Procedure 1. Select all check
boxes and click the Next> button.
(The "select panorama type" step does not apply to document stitching.)
-
Step 4/7 - Place
stitching points (manual document stitching). Press the
light bulb button to see the tips for manual document stitching.
Place 2 stitching points in corresponding positions on the pair of images.
Click the Next> button.
-
Step 5/7 - Preview at
low resolution (manual document stitching). Press the light
bulb button to see the tips for manual document stitching.
-
You do not need to test Step
6/7 and Step 7/7. These are the same as Step 6/7 and Step 7/7 for
fully automatic stitching.
|
