When you open an overlap region and choose the Fine tuning option, The
Panorama Factory displays fine tuning rectangles that you can edit
manually. When you set the zoom scale greater than 100%, the
rectangles do not display properly. At 200%, only the top half
displays correctly; at 300%, only the top third displays properly; and so
on.
We have prepared a patch for The Panorama
Factory V5.0 that corrects this problem.
This cumulative patch corrects the problems
described in Trouble Reports
759, 761, 794,
802, 805,
806, 811, 823,
842, 854,
856, 895 and
899.
Windows Patch
Download here:
http://www.panoramafactory.com/patch/pfactory_patch_5.0.2696.exe
(4.29 MB)
(supersedes patches 5.0.2669, 5.0.2673, 5.0.2675,
5.0.2677 and 5.0.2686)
To install the patch, either:
Select the "Open" button on the File
Download dialog box (Internet Explorer) to run the setup automatically
after the download finishes;
or:
Save the patch file to your computer and
then double-click it from Windows Explorer.
Mac Patch
Download here
http://www.panoramafactory.com/patch/pfactory_patch_5.0.2696.dmg
(3.1 MB)
(supersedes patches 5.0.2669, 5.0.2673, 5.0.2675,
5.0.2677and 5.0.2686)
- If the patch disk image does not open
automatically in Finder, locate the downloaded file with Finder and
double-click it to open it.
- In Finder, you should see a window with
some instructions and the icon for a file with a name similar to
Do_Patch_0000.term.
- Double-click the Do_Patch icon to install
the patch.
- A Terminal window opens and displays
messages about the patch installation.
- If all goes well, the messages in the
Terminal window will tell you that the patch is complete.
- Close the Terminal window and eject the
disk image.
