Átlapolási tartomány / Overlap region dialog box
The Átlapolási tartomány / Overlap region dialog box appears when you open the overlap between one image and the next. You use the Átlapolási tartomány / Overlap region dialog box to adjust the alignment between the images, adjust focal length, adjust the correction for barrel distortion, control alignment fine tuning, adjust image-to-image exposure matching and adjust the correction for brightness falloff.
Common controls for all overlap tasks
Képigazítás / Image alignment
Fókusztávolság- és hordótorzítás-korrekció / Focal length & barrel correction
Finomhangolás / Fine tuning
Expozíció és csökkenés korrekció / Exposure & falloff correction
Common controls for all overlap tasks
The top portion of the Átlapolási tartomány / Overlap region dialog box controls navigation and selects the task you want to perform.
<--- Előző / Prev
Closes the current overlap region and opens the one to its left.
This performs the same action as the Előző kép vagy varrat / Previous image or seam command
(Kép / Image menu).
Shortcuts ALT+LEFTARROW
Context menu in current image pane
Következő / Next --->
Closes the current overlap region and opens the one to its
right. This performs the same action as the Következő kép vagy varrat / Next image or seam command (Kép / Image menu).
Shortcuts ALT+RIGHTARROW
Context menu in current image pane
Bezár / Close
Closes the current overlap region and returns to the stitched
image. This performs the same action as the Jóváhagyás / Approve command (Kép / Image menu).
Shortcut Context menu in current image pane
Válasszon egy 'Átlapolás' feladatot / Choose an Overlap task
Four different overlap tasks can be performed with the Átlapolási tartomány / Overlap region dialog box. Selecting a task
determines the set of controls that are available on the dialog box.
Képigazítás / Image alignment — Adjust overall alignment of the overlapping images.
Fókusztávolság- és hordótorzítás-korrekció / Focal length & barrel correction — Adjust the camera focal length setting and the correction for barrel distortion so that the images match properly.
Finomhangolás / Fine tuning — Make small-scale adjustments to correct for local mismatches in the image alignment.
Expozíció és csökkenés korrekció / Exposure & falloff correction — Adjust the image-to-image exposure matching and correct for brightness falloff in the corners of the images.
top
Képigazítás / Image alignment
The image alignment task provides the ability to adjust overall alignment between one image and the next.
Refer to “Manually aligning images” in Chapter 6, “Correcting stitching problems” for step-by-step instructions.
Átlapolás megtekintése / View overlap
Egyesítés / Blend — Select this option to show the overlap region normally, as a blend of the two images.
Komparálás / Compare — Select this option to highlight differences between the images in the overlap region. A medium gray color is shown when the images match exactly. Brighter or darker colors indicate mismatches between the images.
Kép beállítása / Adjust image
Use the arrow buttons to move the right hand image relative to
the left hand image. Individual clicks on the buttons move the image by single
pixels. Holding a button down causes the image to move continuously. If you
hold the button for a long time, the motion accelerates.
top
Fókusztávolság- és hordótorzítás-korrekció / Focal length & barrel correction
The focal length and barrel correction task provides the ability to interactively adjust the focal length and barrel correction settings.
Refer to “Adjusting focal length and barrel correction” in Chapter 6, “Correcting stitching problems” for step-by-step instructions.
Átlapolás megtekintése / View overlap
Egyesítés / Blend — Select this option to show the overlap region normally, as a blend of the two images.
Komparálás / Compare — Select this option to highlight differences between the images in the overlap region. A medium gray color is shown when the images match exactly. Brighter or darker colors indicate mismatches between the images.
Fókusztávolság / Focal length
Enter the focal length of the lens in millimeters. This may be
the actual focal length of the lens or the 35mm equivalent focal length,
depending upon the options you selected on Wizard step
3/9 – Határozza meg a kameráját / Describe your camera or the Kamera tulajdonságok / Camera properties dialog box.
You can click the up and down arrows to adjust the focal length value by small steps. Holding a button down continuously adjusts the value. If you hold the button for a long time, the adjustment accelerates.
NOTE: The focal length setting applies to all overlap regions in your panorama and may slightly affect the image-to-image alignment. You should check the alignment in each overlap region after changing this setting.
Finomítás ±50% / Refine ±50%
Select this button to refine the focal length setting based upon
the current pair of images at their current relative alignment. You may get
erratic results if the overall image alignment is incorrect, so adjust overall
alignment before refining focal length.
Hordótorzítás korrekció / Correct barrel distortion
If your camera and lens combination exhibit barrel (or
pincushion) distortion, you can use this value to correct it. Use small
negative numbers (-0.05 is a large correction) to correct barrel distortion.
Use small positive numbers (0.05 is a large correction) to correct pincushion
distortion. To disable the correction, enter zero.
You can click the up and down arrows to adjust the focal length value by small steps. Holding a button down continuously adjusts the value. If you hold the button for a long time, the adjustment accelerates.
NOTE: The correction for barrel distortion applies to all overlap regions in your panorama and may slightly affect the image-to-image alignment. You should check the alignment in each overlap region after changing this setting.
NOTE: Correcting barrel distortion will increase the time required to compute your panorama.
Finomítás fókusztávolsággal / Refine with focal length
If you select this checkbox, the barrel correction will be
refined with the focal length when you select the Finomítás ±50% / Refine ±50% button.
Enter the focal length of the lens in millimeters. This may be the actual focal length of the lens or the 35mm equivalent focal length, depending upon the options you selected on Wizard step 3/9 – Határozza meg a kameráját / Describe your camera or the Kamera tulajdonságok / Camera properties dialog box.
top
Finomhangolás / Fine tuning
The fine tuning task provides the ability to make small-scale adjustments to correct for local mismatches in the image alignment.
Refer to “Fine tuning the image alignment” in Chapter 6, “Correcting stitching problems” for step-by-step instructions.
Átlapolás megtekintése / View overlap
Egyesítés / Blend — Select this option to show the overlap region normally, as a blend of the two images.
Komparálás / Compare — Select this option to highlight differences between the images in the overlap region. A medium gray color is shown when the images match exactly. Brighter or darker colors indicate mismatches between the images.
Téglalap beállítása / Adjust tile
Use the arrow buttons to move the right hand image relative to
the left hand image within the selected fine tuning tile.
Individual clicks on the buttons move the image by single pixels. Holding a button down causes the image to move continuously. If you hold the button for a long time, the motion accelerates.
Automatikus finomhangolás / Auto fine tune
Use this button to discard the fine tuning of the current overlap
region and then automatically fine tune the region.
Finomhangolás törlése / Clear fine tuning
Use this button to discard the fine tuning of the current overlap
region.
top
Expozíció és csökkenés korrekció / Exposure & falloff correction
The exposure and falloff correction task provides the ability to adjust exposure matching between one image and the next and the brightness falloff correction.
Refer to “Fine tuning the image alignment” in Chapter 6, “Correcting stitching problems” for step-by-step instructions.
<--- Fényerő / Brightness --->
Use this slider to adjust the exposure matching between adjacent
images. Moving the slider to the left increases the brightness of the lefthand
image (or decreases the brightness of the righthand image). Moving the slider
to the right increases the brightness of the righthand image (or decreases the
brightness of the lefthand image).
Fényerőcsökkenés korrekció / Correct brightness falloff
If your camera and lens combination exhibit brightness falloff in
the corners you can use these values to correct it.
Mennyiség / Amount — The brightness falloff factor in the extreme corners of the image. The value represents the brightness in the corner of the image relative to the center of the image. For example, a value of 0.1 means that the brightness has fallen off by one tenth (i.e. to 90% brightness) in the corner.
Méret / Size — The spread of the falloff outward from the corners of the image. The value represents the distance from the corner at which the falloff reaches approximately 50% of its maximum. For example, a value of 0.1 means that the brightness falloff is at 50% of the maximum falloff at about one tenth the distance from the corners to the center.
NOTE: Correcting brightness falloff will increase the time required to compute your panorama.
NOTE: The brightness falloff correction applies to all overlap regions in your panorama. You should check each overlap region after changing this setting.
top