Изображение / Image menu
Одобрить / Approve command
Показать источник / Show source command
Перезапустить Мастер / Restart the Wizard command
Свойства / Properties command
Панорамные свойства / Panoramic properties command
Заметки / Notes command
Горячие точки / Hotspots command
Улучшение качества / Improve quality command
Точная подгонка / Fine tune command
Сброс точной подгонки / Clear fine tuning command
Повторная сшивка / Restitch command
Повторное слияние / Reblend command
Автоматическое слияние наложений / Automatically blend overlaps command
Смешать сейчас перекрытые / Blend overlaps now command
Зона перекрытия / Overlap region > Открыть / Open command
Зона перекрытия / Overlap region > Восстановление формы по умолчанию / Reset default shape command
Следующее изображение или шов / Next image or seam command
Предыдущее изображение или шов / Previous image or seam command
Одобрить / Approve command
Use this command to approve the current image processing operation.
Shortcut Context menu in current image pane
top
Показать источник / Show source command
Use this command to show the source of the current image for the purpose of modifying the computed image. The source image is displayed along with the decorations and/or dialog box that generated the computed image. You can modify the settings and reapprove.
Shortcuts Context menu in current image pane
Context menu in computed thumbnails pane
top
Перезапустить Мастер / Restart the Wizard command
Use this command to restart the Wizard at any Wizard step on a panorama that you have already stitched. You can modify any of the Wizard settings and then restitch the panorama.
This command can be applied to any stitched image or any image that is derived from a stitched image. It places you in the Wizard at the final Wizard step. You can use the Back button to change any Wizard step, including the one for selecting the stitching method.
To add or remove images or change the order of the images, go back to Wizard step 1/9 – Импорт изображений / Import your images. In that Wizard step you can click and drag the images to change their order or use the Вставить / Add images and Удалить / Remove images buttons to add and remove images from your panorama. See “Wizard step 1/9 – Импорт изображений / Import your images” in Chapter 3, “Using the Stitching Wizard to make a panorama” for more information.
When you complete the Wizard, The Panorama Factory restitches the panorama, replacing the existing panorama with the restitched one. Other images that are derived from the stitched image are updated accordingly.
If you cancel the Wizard, the images will remain unchanged.
Shortcuts Context menu in current image pane
Context menu in computed thumbnails pane
top
Свойства / Properties command
Use this command to view and edit the properties of the image. This command runs the Свойства Изображения / Image properties dialog box.
Shortcuts Context menu in current image pane
Context menu in computed thumbnails pane
Context menu in imported thumbnails pane
top
Панорамные свойства / Panoramic properties command
Use this command to view and edit the panoramic properties of the image. This command runs the Панорамные свойства изображения / Panoramic image properties dialog box.
Shortcuts Context menu in current image pane
Context menu in computed thumbnails pane
Context menu in imported thumbnails pane
top
Заметки / Notes command
Use this command to view and edit the title and description of the image. This command runs the Заметки к изображению / Notes for image dialog box. This dialog box displays an edit window in which you can keep track of any notes that you want to record with the image. For example, you might want to use this note to indicate which is the final image for printing or which should be used for a web thumbnail. The Panorama Factory displays the title above the image thumbnail.
Shortcuts Context menu in current image pane
Context menu in computed thumbnails pane
Context menu in imported thumbnails pane
top
Горячие точки / Hotspots command
Use this command when you want to add hotspots to your image. This command opens the Свойства Горячей точки / Hotspot properties dialog box. To learn more, read “Adding hotspots to your panoramas” in Chapter 7, “Making a virtual tour.”
top
Улучшение качества / Improve quality command
Use this command to recompute the current image by directly sampling the imported images. To learn more about the Улучшение качества / Improve quality command, see “Classic step 6 – Sharpen the resized image” in Chapter 4, “Using the Classic interface, step by step.”
Shortcut Context menu in current image pane
top
Точная подгонка / Fine tune command
Use this command to fine tune the image alignment. To learn more about fine tuning, see “Fine tuning the image alignment” in Chapter 6, “Correcting stitching problems.”
Shortcuts Context menu in current image pane
top
Сброс точной подгонки / Clear fine tuning command
Use this command to remove the fine tuning of an image.
You can use this command in two ways. If you use it when the stitched image is in the current image pane, The Panorama Factory will remove the fine tuning of all overlap regions.
To remove the fine tuning of one overlap region at a time, you must use the Сброс точной подгонки / Clear fine tuning command when that overlap region is open. To open an overlap region, click the handle at the top or bottom edge of an overlap outline or double-click anywhere on the outline when the stitched image is showing (see the Сшить / Stitch command). Once the overlap region is open, you can use the Сброс точной подгонки / Clear fine tuning command to remove the fine tuning or correct the fine tuning manually.
Shortcuts Context menu in current image pane
top
Повторная сшивка / Restitch command
Use this command to repeat the stitching of a panoramic image after you change settings on the Свойства Камеры / Camera properties dialog box, Свойства Выравнивания / Alignment properties dialog box, Свойства Слияния / Blending properties dialog box or Свойства Точной подстройки / Fine tuning properties dialog box.
This command is available only when you are viewing a panoramic image.
Shortcuts Context menu in current image pane
top
Повторное слияние / Reblend command
Use this command to repeat the blending of a panoramic image without restitching it after you change settings on the Свойства Слияния / Blending properties dialog box.
This command is available only when you are viewing a panoramic image.
Shortcuts Context menu in current image pane
top
Автоматическое слияние наложений / Automatically blend overlaps command
Use this command to enable or disable automatic blending of overlap regions. A checkmark is shown beside the command if automatic blending is enabled. When automatic blending is enabled, the panorama is blended each time you edit the boundary of an overlap region. When automatic blending is disabled, blending is deferred until you select the Смешать сейчас перекрытые / Blend overlaps now command. Unblended overlap regions are are drawn with dotted lines.
This command is available only when you are viewing a panoramic image.
Shortcuts Context menu in current image pane
top
Смешать сейчас перекрытые / Blend overlaps now command
Use this command to blend all unblended overlap regions.
This command is available only when you are viewing a panoramic image with unblended overlap regions.
Shortcuts Context menu in current image pane
top
Зона перекрытия / Overlap region > Открыть / Open command
You can use this command to open the selected overlap region and display the Область наложения / Overlap region dialog box.
This command is available only when a single overlap region is selected.
Shortcuts Context menu in current image pane
top
Зона перекрытия / Overlap region > Восстановление формы по умолчанию / Reset default shape command
This command resets the selected overlap regions to their default shapes after you have edit their boundaries.
This command is available when one or more overlap regions are selected.
Shortcuts Context menu in current image pane
top
Следующее изображение или шов / Next image or seam command
When viewing an imported or computed image, use this command to close the current image and open the one to its right in the thumbnail list.
When viewing an overlap area of a stitched image use this command to close the current overlap region and open the one to its right.
Shortcuts ALT+RIGHTARROW
Context menu in current image pane
top
Предыдущее изображение или шов / Previous image or seam command
When viewing an imported or computed image, use this command to close the current image and open the one to its left in the thumbnail list.
When viewing an overlap area of a stitched image use this command to close the current overlap region and open the one to its left.
Shortcuts ALT+LEFTARROW
Context menu in current image pane
top