Edit menu



Undo/Can't Undo command
Cut command
Copy command
Paste command
Delete selected command
Duplicate selected command
Rotate right 90 command
Rotate left 90 command
Rotate 180 command
Reverse selected command



 

Undo/Can't Undo command

Use this command to reverse the last editing action, if possible. The name of the command changes, depending on what the last action was. The Undo command changes to Can't Undo on the menu if you cannot reverse your last action.

Undo is not yet implemented.


top


 

Cut command

Use this command to remove the currently selected data and put it on the clipboard. This command is unavailable if there is no data currently selected.

Cutting data to the clipboard replaces the contents previously stored there.

Shortcuts         CTRL+X


top


 

Copy command

Use this command to copy selected data onto the clipboard. This command is unavailable if there is no data currently selected.

Copying data to the clipboard replaces the contents previously stored there.

Shortcuts         CTRL+C


top


 

Paste command

Use this command to insert a copy of the clipboard contents at the insertion point. This command is unavailable if the clipboard is empty.

Shortcuts         CTRL+V


top


 

Delete selected command

Use this command to delete images from either thumbnail pane.

You can delete any image you wish, including an imported image, but only if it is not the source of a computed image.

Shortcut          Context menu in computed thumbnails pane
Context menu in imported thumbnails pane


top


 

Duplicate selected command

Use this command to make a duplicate copy of images from either thumbnail pane. The new images are added to the end of the thumbnail list.

This command is useful if you want to duplicate one or two images at the ends of a 360 degree panorama to make it more than 360 degrees wide.  It’s extremely frustrating to complete the entire stitching process only to decide that you want a little more image at the left or right end of the panorama. The extra images give you the freedom to make small framing changes later.

It is unnecessary to duplicate images if you are using the Stitch 360 command to stitch your panorama.


top


 

Rotate right 90 command

Use this command to rotate images clockwise 90 degrees. You can rotate selected thumbnail images or the current image.  If no images are selected, this command rotates all imported images.

When applied to imported images, this command rotates them in-place.  When applied to computed images, this command performs the Rotate command (New image menu).

If you duplicate an imported image, the Rotate right 90 command is unavailable for the duplicate image until it has been written to a disk file. So if you want to rotate a duplicate imported image, be sure to save your project first.


top


 

Rotate left 90 command

Use this command to rotate images counter-clockwise 90 degrees. You can rotate selected thumbnail images or the current image.  If no images are selected, this command rotates all imported images.

When applied to imported images, this command rotates them in-place.  When applied to computed images, this command performs the Rotate command (New image menu).

Note that this command applies only to imported images and rotates them in-place. If you duplicate an imported image, the Rotate left 90 command is unavailable for the duplicate image until it has been written to a disk file. So if you want to rotate a duplicate imported image, be sure to save your project first.


top


 

Rotate 180 command

Use this command to rotate images 180 degrees. You can rotate selected thumbnail images or the current image.  If no images are selected, this command rotates all imported images.

When applied to imported images, this command rotates them in-place.  When applied to computed images, this command performs the Rotate command (New image menu).

Note that this command applies only to imported images and rotates them in-place. If you duplicate an imported image, the Rotate 180 command is unavailable for the duplicate image until it has been written to a disk file. So if you want to rotate a duplicate imported image, be sure to save your project first.


top


 

Reverse selected command

Use this command to reverse the order of selected thumbnail images. You can reverse selected images in the imported thumbnails pane or the computed thumbnails pane. .  If no images are selected, this command reverses the order of all imported images


top



© 1999-2009, Smoky City Design, LLC
Updated: March 6, 2009